| |
Wednesday, December 31. 2008Friday, June 27. 2008Cypress?s New Portfolio of Touchscreen Solutions Includes Multi-Touch All Point Offering On a Single Chip
Filed under: Electronic ComponentTraining
 Cypress Semiconductor Corp. introduced the TrueTouch touchscreen solution based on the PSoC programmable system-on-chip architecture. The TrueTouch offering includes a single-chip touchscreen solution that can interpret up to 10 inputs from all areas of the screen simultaneously. Friday, June 27. 2008News: New Clamp and Roller Bar information from Serapid
Sterling Heights, MI - Serapid, a leader in quick die change engineering, is pleased to announce new data sheets for their quick die change clamps and roller bars.
Friday, June 27. 2008News: IR has Three-Phase Gate Driver IC with Integrated Operational Amplifier & Bootstrap Functionality
El Segundo, CA - International Rectifier, IR (NYSE:IRF), a world leader in power management technology, introduced the IRS233x(D) family of three-phase gate driver ICs for low-, mid-, and high-voltage motor drive applications including permanent magnet (PM) motor drives for air conditioners, washing machines, pumps and fans, and micro, mini and general purpose inverter drives.
Thursday, June 26. 2008New Parker Guide features Daedal Positioning Products and Systems
Filed under: X-Y PositioningMechanical Components
 Parker's Electromechanical Automation Division, a leading supplier of motion control technology, announces the release of a new catalog featuring its Daedal brand of positioning products. The 328-page, full-color guide covers linear motor-driven tables, screw-driven automation tables, miniature positioners, belt-driven automation tables and drives and controllers. Thursday, June 26. 2008Wednesday, June 25. 2008New Nano Positioner from National Aperture
Filed under: X-Y PositioningLinear Stage
 NAI announces the release of the new MM-3M-F-LS-NM nanometer linear micro-stage with linear encoder-based 15-25nm resolution. Perfect for ultra-fine motion, long travel, and limited space applications. Tuesday, June 24. 2008Tech Article: Sizing Pneumatic Cylinders and ISO valves
By Chris Landis, Valve/Vacuum Product Manager, Parker Hannifin Corporation
Look at flow coefficient, cylinder bore, and rod speed to best match pneumatic actuators and valves. In recent years, much discussion has centered on Cv ratings (also known as capacity coefficients or flow factors) and whether or not American, European, and Japanese pneumatic-valve manufacturers rate valves the same way. With ANSI/NFPA, ISO, and JIS organizations all specifying slightly different test methods and rating criteria, the confusion is understandable. Tuesday, June 24. 2008Parker Hannifin Pneumatic Cylinders Help Increase Palletizer Speed by 26%
Filed under: Pneumatic
 St. Louis-based FKI Logistex, a leading supplier of palletizers and depalletizers to the material handling industry, needed to increase speed rates on the case turner component of some of its palletizer products in response to customer specifications.These high-speed case palletizers operate in warehouse and distribution, manufacturing, airports, and postal and parcel applications. The A-940 inline palletizer can reach speeds in excess of 200 cases per minute. Tuesday, June 24. 2008NAI Offers the New MM-1M-F Motorized Micro-Mini Stage
Filed under: X-Y PositioningLinear Stage
 NAI redefines SMALL with the release of their NEW MM-1M-F Motorized Micro-Mini stage. This small-sized (2.0"L X 0.5"H X 0.5"W) micro-mini stage delivers hi-torque, high resolution (0.099), 5mm travel and precision positioning. Available in X, XY, or XYZ configurations Tuesday, June 24. 2008News: ANSYS Receives SEC Clearance for Ansoft Acquisition
Southpointe, PA and Pittsburgh, PA - ANSYS, Inc. (NASDAQ: ANSS) and Ansoft Corporation (NASDAQ: ANST) announced that the Securities and Exchange Commission has concluded its review of the Registration Statement on Form S-4 in connection with ANSYS' acquisition of Ansoft.
Sunday, June 22. 2008News: OMRON Releases Three New PLCs and Related Products With Industrial EtherNet/IP Compatibility
Kyoto, Japan - OMRON Corporation (TOKYO:6645)(ADR:OMRNY) announced the release of three new products, the SYSMAC CJ2 programmable controller, EtherNet unit for CS/CJ series and CX-One FA Integrated Tool Package version 3.0, to markets. All of these products support EtherNet/IP for industrial use.
Friday, June 20. 2008News: Amphenol Fiber Systems International Receives AS9100 Certification
Allen, TX - Jerome Sistrunk, Director of Quality Assurance for Amphenol Fiber Systems International (AFSI), announced today that AFSI has been approved for AS9100 certification. AS9100 incorporates the entirety of ISO 9001:2000 while adding additional stringent quality, aerospace and safety requirements.
Thursday, June 19. 2008Maxon Motor Expands its Range of Brushed DC Motors with the Powerful RE 65
Filed under: DC Motor
 The top performance range of maxon motor's RE program is being boosted. The new RE 65 power package delivers 250 watts and can handle the toughest demands. Thursday, June 19. 2008Industrial Encoder Corp Offers Magnetic Encoders for Industrial Applications
Filed under: EncoderMechanical Components
 The IEC Magnetic Encoder is very similar to the IEC Optical Encoders that perform with very high reliability in many varied demanding applications. The only change is that the reading system within the encoder detects magnetic pulses rather than optical signals. The mechanical system and the signal processing electronics of the Magnetic Encoder are the same as that used in the Optical Encoders. Tuesday, June 17. 2008JOB: Precision Machine Control Engineer
Responsible for designing, developing and troubleshooting precision machines and machine control systems for company projects and programs.
Tuesday, June 17. 2008JOB: Sales Engineer
A minimum of 3-5 years successful outside sales experience is required.
Tuesday, June 17. 2008JOB: Application Sales Manager
Seeking an experienced Sales Application Manager to develop, promote, and sell motion control products to prospect, new and existing customers throughout the US.
Tuesday, June 17. 2008Linak AS Electric linear actuation is the bedrock of LINAK® as a global enterprise. LINAK provides innovative actuation solutions that improve people's quality of life and working environment. Monday, June 9. 2008Baldor Electric Company We design, manufacture & market a broad line of energy-efficient electric motors, adjustable speed drives, ac, linear, stepper and servo motors, motion software, gear and generator products.Monday, June 9. 2008Wednesday, June 4. 2008Tuesday, June 3. 2008Micronor Inc. Manufacturer of absolute and incremental encoders, resolvers, cam timers, rotary limit switches, motorized potentiometers, custom feedback units, manual pulse generators, and handheld pendants for use in industrial automation and motion control applications.Tuesday, June 3. 2008Friday, May 30. 2008Zaber Technologies Inc. Zaber Technologies Inc. was founded in 1997 when precision motion control was typically accomplished with DC motors and encoders. In 2000 Zaber introduced the first daisy-chainable miniature linear actuator based on stepper motor technology with integrated RS232 communications and control electronics in one small package. Since then Zaber has added over 120 products to its family of precision motion control and laboratory automation devices including linear actuators, linear slides, motorized x-y-z stages, rotation stages, motorized mirror mounts, and micro-stepping motor controllers.Tuesday, May 20. 2008Pacamor Kubar Bearings Pacamor Kubar Bearings is a domestic manufacturer of high precision miniature and instrument bearings and offers over 40 years of expertise in radial ball bearings. Located in Troy, NY, Pacamor Kubar Bearings is one of the last American owned and operated.Tuesday, May 20. 2008Monday, May 19. 2008Aerotech, Inc Since 1970, Aerotech has designed and manufactured the highest performance motion control and positioning systems for our customers in industry, government, science and research institutions around the world. Products include linear motor stages and x-y gantries, ball screws, linear and rotary x-y stages, motion controllers, drives, and dc motors.Sunday, May 18. 2008JOB: Outside Applications Engineer
A degreed professional Engineer preferably with a solid background in DC motor science... |
We provide on-line product marketing services to manufacturers and designers of motion control product and component parts.
SFO TAKUMI INC, as a sole distributor of Kyopal, can provide satisfactory solution to all motor controller users. We also offers wide-rage of services to source other ICs to our customers.
OptoSigma Corporation offers motor controllers, high precision low profile 5-phase stepper motors, servo motors, actuators and vacuum compatible motorized stages in X, Y, Z and rotational configuration. Linear encoder (Magnescale) models are also available.
Designer & manufacturer of motor & servo motion products primarily for the Commercial Motor, Industrial Motion Control, & Aerospace & Defense markets. Products include brush & brushless DC motors, direct-drive torque motors, servo motors & encoders